 |
The DeVilbiss JGA is a manual high performance, conventional air atomising spraygun suitable for most liquid spray finishing and surface coating applications. A extensive range of Air Cap, Fluid Tip and Needle combinations is available to enable the gun to be used with virtually all industrial or refinish paints, coatings, lubricants, dyes, stains, varnishes, lacquers and adhesives. When the quantities of material being handled do not justify a remote supply then suction feed provides the ideal uncomplicated solution. The cup capacity is a generous 1 litre sufficient for most Refinishing or small scale industrial applications. |
CONVENTIONAL NOZZLE SELECTION GUIDE
| The DeVilbiss JGA in remote pressure feed form is suitable for all types of production spraying with paint, coating or adhesives being supplied from a pressure feed tank or a fluid delivery pump. Fast application rates can be easily achieved to match production line speeds and remote feed allows the gun to be used at all angles including upside down without affecting performance. The large selection of Air Cap, Fluid Tip and Needle combinations make the JGA one of the most versatile sprayguns in the world. Applications include motor vehicle manufacturers, the ceramic industry, plastics, woodworking, general engineering, adhesives and many more. |  |
CONVENTIONAL NOZZLE SELECTION GUIDE
 |
The DeVilbiss GFG is a manual, gravity feed, conventional air atomising gun suitable for most liquid spray finishing and surface coating applications. The extensive range of Air Cap, Fluid Tip and Needle combinations is available to enable the gun to be used with virtually all industrial or refinish paints, coatings, lubricants, dyes, stains, varnishes lacquers and adhesives. Built to withstand continuous production line duty the GFG gun body is produced in drop forged aluminium and the replaceable air cap retaining baffle eliminates the need to replace the gun body should the threads become worn or damaged. |
CONVENTIONAL NOZZLE SELECTION GUIDE
| The DeVilbiss MTG is a manual high performance, conventional air atomising gun suitable for most liquid spray finishing and surface coating applications. The gun is compact and lightweight making it ideally suited for low to medium production applications or for small area work where colour matching or quality atomisation is required. The gun has stainless steel wetted parts and it is therefore suitable for the application of waterbased or corrosive materials. |  |
 |
The mps combines renowned DeVilbiss atomisation expertise and high quality manufacturing standards in a compact and lightweight miniature gravity feed spraygun. The gun is ideal for finishing smaller industrial products, for automotive refinishing touch in repairs and for duties in numerous trades and graphic arts professions. For capacity without weight penalty the MPS can be supplied complete with a 1/2 pint (284ml) nylon cup. The cup lid incorporates a special "Drip Check" device to prevent spills and leakage even when working at extreme angles. A disposable nylon mesh paint filter into the guns fluid inlet if required. |
| The DeVilbiss AGG is an automatic high performance, conventional air atomising gun suitable for most liquid spray finishing and surface coating applications. A extensive range of Air Cap, Fluid Tip and Needle combinations is available to enable the gun to be used with virtually all industrial paints, coatings, foodstuffs, lubricants, dyes, stains, varnishes, lacquers and adhesives. |  |
CONVENTIONAL NOZZLE SELECTION GUIDE
